Sachtler Artemis EFP , camera stabilization system
Sachtler Artemis EFP, specifications (32KB .PDF)
| Sachtler Artemis EFP |
| - professional camera stabilization system - quick assembling and disassembling, no tools needed - ideal for any kind of professional video, 16mm, S16mm - if necesarry the EFP setup can be upgraded with Wireless Follow Focus System with one or two chanelles. The focus can be even controled with operator himself, if there is need for that. - Zoom control for Video lenses is also avilable - External Tally Kit makes operating with video cameras, much easier and more confortable - With Chroisziel Quick Lock Plate™, there are no jitters with video cameras, even in running shots - Rain Covers, asures that all equipment is safe in any weather condition - Custom made Flight Cases and Peli Cases™, asure safe and fast transport with car, airplane, ship,... - 2,4GHz Transmiter (Tx) and Reciver (Rx), asure wireless and noisless picture viewing on video assist monitor - Accesories like, D-Bracket, Low Mode Brackets for Video Cameras, Low Mode Cage, Triax Cable, Chroisziel Light Weight Supports™ for Sony Video Cameras, can be aded to Artemis EFP package. |
Sachtler Artemis EFP - Camera Stabilizing System Specifications
| artemis EFP | 12V for SD |
| Side to Side (touch & go) | SD Video |
| Focus Bracket | Genio / Fox / C-Motion / ARRI / Scorpio / Bartech |
| Standard Post 16"-27" | for Cine - Cine HD - EFP |
| Gimbal | no tool clamp for Cine HD - Cine - EFP Pro (upgraded for this EFP) |
| Sled Cine | SD Video |
| 12 Pin System Cabel | Lemo 2B for Cine HD - Cine - EFP |
| Battery Mount Set | Anton/Bauer / |
| C Battery Bracket | Anton/Bauer |
| Docking Bracket | |
| Post Tool | |
| Allen Wrench | 4 mm |
| Allen Wrench | 6 mm |
| Allen Wrench | 2 mm |
| Allen Wrench | 1.5 mm |
| Camera Mounting Screws | 3/8" 16 |
| Spring arm | |
| Spring Arm | 19 kg (57.3 lbs) |
| Vest | |
| Cordura Vest | Artemis |
| Cases / Soft Bags / Rain Covers | |
| Arm Softbag | cordura soft bag for artemis spring arm |
| Vest Soft Bag | cordura soft bag for artemis vest |
| Steadi Sleeve rig soft bag | cordura soft bag for artemis Cine HD / Cine / EFP Pro / EFP system |
| Flight Case for Sled | Custom made Flight Case for Cine Sled in Steadi Sleeve and cables |
| Flight Case for Vest | Custom made Flight Case for Vest and Arm |
| Raincover Sled | (EFP) |
| Raincover for Spring Arm | (EFP) |
| Raincover for Monitor | Transvideo Cine III |
| Stand | |
| "C"-Stand | detachable turtle base - maximum height 155 cm (61 inches) |
| External Tally Kit | for artemis EFP |
| Tally Sensor Cable | |
| Lower Tally Red Light | for monitor |
| Upper Tally Red Light | with 15 mm Rod Mount |
| Cable Sets | |
| EFP Cable Set | SD Video / 12V camera power |
| includes | |
| Cam Pwr 12V | 4 pin XLR (Video & ARRI SR I & ARRI SR II & Aaton) |
| Video Cable (10") Analog | SDI/RGB Video |
| Batteries and Chargers | ||
| Anton/Bauer ProFormer | x 6 | 14.4 V / 30 Wh (Ni-Cd) |
| Anton/Bauer Titan T2 PowerCharger | 40 Watt (2 Channels) |
| Monitor | |
| Cine III Monitor | for Cine HD / Cine / EFP |
| Transvideo Cine III |
4x3 / 800 Nits High Brightness (SD) Monitor / Pal / NTSC / 16x9, Anamorphic, 4x3 with 16x9 markers,... video modes |
| Transvideo Mounting Adapter | monitor mount incl. spirit bubble (for Cine III) |
| Telescopic Monitor Arm | incl. postclamp (for Cine HD / Cine / EFP) |
Monitor Cable Analog |
8pin Lemo -> BNC & 12V XLR |
| Zoom Control | |
| Model | Bebob ZOE III |
| Fetures |
Zoom direction control; Zoom speed wheel; record button; return button |
| Video Lenses | Canon; Fujinon Professional |
| Tx / Rx | |
| ISM band | 2400 - 2483MHz, Video/Audio |
| channals | 4 |
| antena mode | dipole (omnidirectional) |
| demodulation method | FM |
| full range | EIA, CCIR, PAL, NTSC |
Tx, transmitter |
power input: 12V DC power consumption: 1.5W dimensions: 114 x 60 x 33mm weight: 220g |
| Rx, reciver |
power input: 12V DC power consumption: 3.6W dimensions: 129 x 103 x 26mm weight: 180g |
| Wireless Follow Focus System | (optional) |
| Transmiter |
Bartech |
| Reciver |
Bartech channels: one (1) camera switch: yes connectors: Lemo type Power Consumption: 50 milliamps @ 11-17VDC (Motor off) up to 3 amps max when driving a motor Power Output to Motor: 2 amps maximum @ 18 VDC (36 watts) weight: 311 g dimensions: 114 x 89 x 38 mm |
| Motor | Heden, M28VP (with all type of snap-on gears) |
| Gimbal mount hard wire focus module | plugs directly into reciver modul |
| Range | aprox. 100m (above 300feet) |
| Wireless Follow Focus System (two channels) | (optional) |
| Transmiter |
Seitz, Model 8710 output channels:three (3) RF Output: 72Mhz power:11V (internal Ni-CD battery) or 12-24V (external power supply) consumption: 0.25/0.75W modulation: Narrow Band FM weight: 775g dimensions: 188 x 127 x 64mm |
| Reciver |
Seitz, Model 8720 channels : Five analog control, pulse width output 0.94-2.10ms; camera switch: yes connectors: 9 pin "D" type, compatible with all Steadicams; 4 pin Lemo (shell #0) for Camera ON/OFF power: 8 - 25V/100mA max. weight: 245g dimensions: 112 x 62 x 33mm |
| Amplifier | Seitz, Model 8725 dual channel |
| Motor | Heden, M26P |
| Motor | Heden, M28VP (with all type of snap-on gears) |
| Range | aprox. 100m (above 300feet) |
